Kooltherm Pipe Supports - France

Kooltherm Insulated Pipe Support Inserts in France

Kooltherm Insulated Pipe Support Inserts provide optimal load bearing capacity whilst offering protection against insulation compression. Designed for use in pipe supports, hanger brackets and clamps, they will support the compressive loads imposed by horizontal pipework carrying water or other liquids.


Introduction

Kooltherm Pipe SupportKooltherm Insulated Pipe Support Inserts are available to suit a full range of pipe diameters and in a full range of insulation thicknesses and densities. Standard sizes are available (see Technical Data) however special sizes are available on request.

Performance

Thermal pipe supportsKooltherm Insulated Pipe Support Inserts are CE marked, and manufactured from CFC/HCFC -free non-fibrous premium performance insulation.

In addition to allowing a continuous vapour barrier on below ambient systems, thermal analysis of a +75°C LTHW system to EN ISO 10211:2007 has shown that Kooltherm Insulated Pipe Support System can limit heat loss by up to 4x more than rubber lined pipe clips, 5x more than metal pipe clips and 10x more than hardwood pipe support inserts.

Technical Data

Load bearing calculations for the standard range of Kooltherm Insulated Pipe Support Inserts are based on local practices and manufacturers recommendations. They are designed to support the maximum static compressive loads imposed by horizontal water filled mild steel and copper pipework with hanger supports spaced at the maximum centres shown below.

Kooltherm Insulated Pipe Support Inserts are not designed to accommodate pipe anchor loads and stresses. Pipes must be finished with an anti-corrosive coating.

FR Supports Table Steel

 

Downloads

KT French QG in English